Carbon Tech is on the move!

Muncie, Indiana.  “The first phase of our change is accomplished,” stated Rick McKinney, President of Carbon Tech.  On the continuing demand for more product and faster delivery, Carbon Tech took a bold step in moving the distribution operation to Muncie, Indiana.  “I am excited about setting up our operation in a more centrally located area for our dealers and consumers,” stated Rick.  “We plan to increase productivity substantially over the next year in order to keep up with demand without loosing our quality and consistency in performance.” 

One of the biggest reasons to have the distribution setup in Indiana is that now 80% of the dealer market base will be able to receive Carbon Tech shafts within 2 to 3 shipping days rather than 6 as before.  Since Rick is from Muncie, Indiana it was an easy decision to move the operation to his home town.  Pat McKinney, bowhunter, archery champion and older brother of Rick will help manage the new location.

Carbon Tech is known for it’s extremely high precision and accuracy of shafts.  The first company to offer three type of carbon shafts (Super fast – Cheetah, Standard – Whitetail and the heavy and hard hitting Rhino), a special layer on the outside of the shaft to keep splitting and splintering down to a minimum, and emphasized the importance of spine over weight and straightness, Carbon Tech continues to develop better arrow products.. 

Carbon Tech’s new address and phone numbers are:

Mailing:                                                 Shipping:
Carbon Tech                                        Carbon Tech
PO Box 2776                                        2600 Kilgore Ave
Muncie, IN  47309                              Muncie, IN  47304

Phone:  800-951-8736 (dealers only)
Phone:  765-287-8670
Fax:        765-287-8671
www.carbontecharrows.com

 

 

The main contact for support at Carbon Tech Arrows

is Pat McKinney, you can contact him at:

pat@carbontecharrows.com

 

A must read for Carbon Tech Arrows: Carbon Tech Data and Safety Sheet
Spine, Straightness, and Weight Information Sheet
The Results are In
McKinney II’s now available!

We have the new spine chart for both the Mckinney's II and you favorite hunting shafts here's the link: Spine Chart enjoy the updated information.

Suggested retail price for the McKinney II shafts are $349.99,our 2008 deal for the McKinney II shafts are $275.00 a dozen which includes shipping. (In the United States only)

To order click here: Order McKinney II's

In the subject line of the email please put: McKinney II Order

In the email include your name, contact email, day phone number, the size, how many dozen you wish to order, and any special instructions.

Make sure your firewall and virus checker is set to accept rick@carbontecharrows.com or put this address in your email address book as a friend. This way our order reply to you will not get bounced back to us.

Thank you Carbontecharrows.

The shafts accept the following components: Beiter 12-1, 12-2 nocks, ACE/Navigator pins for the McKinney nock and Easton’s pin nock. They accept ACE/Navigator points.

 

We will be offering the shafts only at this time. Most of you already have these components in your tool box.

These shafts are some of the most precise arrow shafts ever made. We do recommend a nocking system that will protect the back end of the nock due to its accuracy. Most archers who have tested these shafts have found that they do hit the back ends a lot from being so consistent.

We recommend Rick’s glue for the points. This 48 hour epoxy gives the shaft better frequency absorption. Just remember to have the glue cure for the "full 48 hours" or you will lose points.

For the pin system, you can use low temperature hot melt. This glue has similar absorption capabilities as Rick’s glue but does not adhere as strongly. We do feel that super glues will not work as well due to the crystallization of the glue after a short period of time. Never use glues with the Beiter nocks. Most glue will attack the plastic and cause the nocks to deform and even break or crack. There are probably some Beiter Outsert nocks that fit, but we have not checked this out for sure.

We do not handle any components at this time. You can order them from your local dealer or from mail order companies like Lancaster Archery or Alternative Sporting Services. Our sale is for a limited time only.

Size/spine weight length

450 6.5 gpi 32”
500 6.1 gpi 32”
550 5.7 gpi 32”
600 5.4 gpi 31”
650 5.1 gpi 31”
725* 4.8 gpi 31”
850 4.5 gpi 30"
950 4.2 gpi 30"
1050 3.9 gpi 30"
*very limited supply

 

CT Rhino XP - Extreme Performance
(Straightness .0015—w/Yellow print)
CT Rhino
(Straightness .005—w/White print)
Weight/Grains Size/Spine
9.5 Grains per inch 35/60 .500
10 Grains per inch 45/70 .400
11.5 Grains per inch 55/80 .300
CT Safari
(Straightness .005—w/White print only)
Weight/Grains Size/Spine
15.5 Grains per inch 70/90 .200

Price: $124.99 - CT Rhino / Click to Order
Price: $174.99 - CT Rhino XP / Click to Order

CT PANTHER
(Straightness .005—w/White print)

Weight/Grains Size/Spine
28” Front Cut (Cut 4” off the front - insert)
8.4 Grains per inch 40/80 .400”


28” Middle Cut (Cut 2” off each end) 8.7 Grains per inch 40/80 .370”


28” Back Cut (Cut 4” off the back - nock) 8.5 Grains per inch 40/80 .340”

Price: $ 129.99 / Click to Order

CT Cheetah
(Straightness .005—w/ White print)
Weight/Grains Size/Spine
5.3 Grains per inch 25/50 .650
6.1 Grains per inch 35/60 .525
6.4 Grains per inch 45/70 .400
7.9 Grains per inch 55/80 .300

CT Cheetah 3-D
(Straightness .0015—w/Yellow print)
Weight/Grains Size/Spine
5.3 Grains per inch 650 .650
6.1 Grains per inch 525 .525
6.4 Grains per inch 400 .400
7.9 Grains per inch 300 .300

Price: $104.99 - Cheetah hunter /Click to Order
Price: $154.99 - Cheetah 3D /Click to Order

CT Whitetail XP - Extreme Performance
(Straightness .0015—w/Yellow print)

CT Whitetail
(Straightness .005—w/White print)

Weight/Grains Size/Spine
5.9 Grains per inch 25/45 .650
6.9 Grains per inch 35/55 .500
7.9 Grains per inch 40/65 .400
9.5 Grains per inch 65/80 .300

Price: $84.99 - Whitetail / Click to Order
Price: $149.99 - Whitetail XP / Click to Order

CT Hippo XP - Extreme Performance
(Straightness .0015—w/Yellow print)

CT Hippo
(Straightness .005—w/White print)

Weight/Grains Size/Spine
7.4 Grains per inch 23/520 .500
7.8 Grains per inch 23/400 .400

Price: $124.99 CT Hippo / Click to Order
Price: $174.99 CT Hippo XP / Click to Order

Copyright © Carbon Tech 2003

If you find any bugs or have any suggestion concerning the website, contact webmaster@carbontecharrows.com